Studi Kinetika Reaksi Ekstraksi Dolomit dengan Asam Fosfat
DOI:
https://doi.org/10.28926/briliant.v11i1.2218Keywords:
Dolomite, Kinetic Reaction, Phosphoric AcidAbstract
Dolomite (CaMg(CO₃)₂) is generally white but can also appear gray or bluish, with magnesium (Mg) and calcium (Ca) as its main composition.. This study analyzes the kinetics and conversion of dolomite extraction using phosphoric acid through a solid-liquid extraction method. Initially, dolomite was calcined at 850°C for 240 minutes and then sieved. A total of 40 grams of the sieved sample was extracted with 250 mL of 2M phosphoric acid at varying temperatures (30, 45, 60, 75, and 90°C) and extraction times (60, 90, 120, 150, and 180 minutes). The extracted solution was filtered and analyzed using AAS to determine the extracted calcium and magnesium content. The highest conversion was achieved at 90°C for 180 minutes, with calcium extraction at 65.67% and magnesium at 65.98%, with the ash layer as the controlling step. The activation energy, based on the Arrhenius equation, was 27,745.49 J/mol·K for calcium and 19,120.5 J/mol·K for magnesium, with reaction rate constants of K=9.8149 e^(3336.6/T) for calcium and K=1.8063 e^(2299.8/T) for magnesium. This study demonstrates that temperature and reaction time significantly influence dolomite extraction, which follows the Arrhenius model, providing valuable insights into the kinetics and efficiency of dolomite extraction using phosphoric acid.
References
Adiman, T. M. F., Feriyanto, A., . S., & Edahwati, L. (2020). Mineral Struvite Dari Batuan Dolomit Dengan Reaktor Kolom Sekat. Jurnal Teknik Kimia, 14(2), 85–91. https://doi.org/10.33005/jurnal_tekkim.v14i2.2034
Altiner, M., Yildirim, M., & Yilmaz, T. (2016). Leaching of mersin/aydincik dolomite ore in hydrochloric acid. dissolution rates. Physicochemical Problems of Mineral Processing, 52(2), 536–550. https://doi.org/10.5277/ppmp160202
Are, C. T., Suleiman, M. A. T., Yisa, J., Auta, M., & Joseph, I. A. (2021). Kinetic Study of Reaction between Dolomite Ore and Trioxonitrate (V) Acid (HNO3). GeoScience Engineering, 67(1), 21–29. https://doi.org/10.35180/gse-2021-0048
Azof, F. I., & Safarian, J. (2020). Leaching kinetics and mechanism of slag produced from smelting-reduction of bauxite for alumina recovery. Hydrometallurgy, 195(May), 105388. https://doi.org/10.1016/j.hydromet.2020.105388
Bahri, E. P., Simanungkalit, I. C. N., Susanti, R. F., Gemilar, G. P., Astuti, W., Petrus, H. T. B. M., & Wanta, K. C. (2024). Kinetika Proses Ekstraksi Katalis Bekas Ni/γ–Al2O3 dengan Pelarut Asam Sulfat: Model Shrinking Core dan Model Lump. JST (Jurnal Sains dan Teknologi), 12(3), 739–747. https://doi.org/10.23887/jstundiksha.v12i3.46264
Bani, G. A. (2023). Analisis Kimia Batu Kapur Kabupaten Kupang Sebagai Bahan Baku Pembuatan Pupuk Dolomit. Jurnal Agroteknologi Pertanian & Publikasi Riset Ilmiah, 5(1), 23–28. https://doi.org/10.55542/jappri.v5i1.616
Basuki, B., & Sari, V. K. (2020). Efektifitas Dolomit Dalam Mempertahankan pH Tanah Inceptisol Perkebunan Tebu Blimbing Djatiroto. Buletin Tanaman Tembakau, Serat & Minyak Industri, 11(2), 58. https://doi.org/10.21082/btsm.v11n2.2019.58-64
Ebrahimi, E., Safari, H., Rezaee, M., Rezaei, A., & Abdollahi, H. (2023). An environmentally friendly method for extraction of cobalt and molybdenum from spent catalysts using deep eutectic solvents (DESs). Environmental Science and Pollution Research, 30(39), 90243–90255. https://doi.org/10.1007/s11356-023-26806-8
Faraji, F., Alizadeh, A., Rashchi, F., & Mostoufi, N. (2022). Kinetics of leaching: A review. Reviews in Chemical Engineering, 38(2), 113–148. https://doi.org/10.1515/revce-2019-0073
Ismael, M. H., Mohammed, H. S., Hussaini, O. M. E., & El-Shahat, M. F. (2022). Kinetics study and reaction mechanism for titanium dissolution from rutile ores and concentrates using sulfuric acid solutions. Physicochemical Problems of Mineral Processing, 58(1), 138–148. https://doi.org/10.37190/PPMP/145166
JOSEPH, I. A., AJALA, E. O., AHMED, E. A., & AJALA, M. A. (2022). Optimization and Kinetics Studies of the Dissolution of Dolomite in Sulphuric Acid (H2So4) Via Box-Behnken Experimental Design. Southern Journal of Sciences, 30(33), 69–81. https://doi.org/10.48141/sjs.v30.n33.2022.09_joseph_pgs_69_81.pdf
Muchendu, E. (2024). Impact of Temperature on Reaction Rate in Catalytic Reactions Impact of Temperature on Reaction Rate in Catalytic Reactions. Journal of Chemistry, 3(3), 38–48.
Natasha, N. C., Irawan, J., Sulistiyono, E., Fariza, E. Y., & Rhamdani, A. R. (2019). Uji Karakteristik Magnesium Karbonat Sintetis Dari Mineral Dolomit. Seminar Nasional Sains dan Teknologi, 16, 1–5.
Royani, A. (2016). Proses Pelarutan Bijih Dolomit dalam Larutan Asam Klorida. Seminar Nasional Sains dan Teknologi, November, 1–5.
Royani, A., Sulistiyono, E., Prasetiyo, A. B., & Subagja, R. (2018). Extraction of magnesium from calcined dolomite ore using hydrochloric acid leaching. AIP Conference Proceedings, 1964(May). https://doi.org/10.1063/1.5038299
Royani, A., Sulistiyono, E., & Sufiandi, D. (2016). Pengaruh Suhu Kalsinasi Pada Proses Dekomposisi Dolomit. Jurnal Sains Materi Indonesia, 18(1), 41. https://doi.org/10.17146/jsmi.2016.18.1.4186
Santacesaria, E., Tesser, R., & Russo, V. (2023). Industrial Chemistry Reactions: Kinetics, Mass Transfer and Industrial Reactor Design (II). Processes, 11(7), 2–7. https://doi.org/10.3390/pr11071880
Saputra, F., Fadli, A., & Amri, A. (2016). Kinetika Reaksi pada Sintesis Hidroksiapatit dengan Metode Presipitasi. Jom FTEKNIK, 3(1), 1–6.
Saputri, D., & Rohmawati, L. (2021). Sintesis Magnesium Oksida (MgO) dari Dolomit Bangkalan dengan Metode Leaching. Jurnal Teori dan Aplikasi Fisika, 9(2), 203. https://doi.org/10.23960/jtaf.v9i2.2808
Sholicha, S. P., Setyarsih, W., Sabrina, G. J., & Rohmawati, L. (2019). Preparation of CaCO3/MgO from Bangkalan’s dolomite for raw biomaterial. Journal of Physics: Conference Series, 1171(1). https://doi.org/10.1088/1742-6596/1171/1/012034
Sulistiyono, Eko., Suharyanto, A. (2024). Kajian Teknologi Pengolahan Mineral Dolomit Indonesia Dan Aplikasi Pemanfaatanya. Seminar Nasional Sains dan Teknologi 2024, April, 1–10.
Supriadi, H., Trisnawati, I., Handini, T., Susilowati, S. R., Sujoto, V. S. H., Mulyono, P., & Petrus, H. T. B. M. (2023). Kinetics Study of Yttrium Leaching from Zircon Tailings Using Sulfuric Acid. Indonesian Journal of Chemistry, 23(2), 489–498. https://doi.org/10.22146/ijc.79966
Wanta, K. C., Perdana, I., & Petrus, H. T. B. M. (2016). Evaluation of shrinking core model in leaching process of Pomalaa nickel laterite using citric acid as leachant at atmospheric conditions. IOP Conference Series: Materials Science and Engineering, 162(1). https://doi.org/10.1088/1757-899X/162/1/012018
Widyastuti, Annisa., Sukamana, Made., Setyadi, M. (2018). Natrium Silikat Menggunakan Air Berdasarkan Shrinking Core Model Kinetic Study on Leaching Mixed of Sodium Zirconate , Sodium Silicate. 205–213.
Zangooei, E., & Talaghat, M. R. (2021). Conversion of Gas-Solid Reactions of the Flat Plate Particles with Unchanged Size Using the Shrinking Core Model. Journal of Chemical and Petroleum Engineering, 55(1), 33–51. https://doi.org/10.22059/jchpe.2020.239139.1206
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Briliant: Jurnal Riset dan Konseptual
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
