Analisis Probabilitas Risiko dan Usulan Perbaikan Pada Proses Weaving Pembuatan Produk Handuk di PT Paberik Tekstil Kasrie Menggunakan Metode Fuzzy-Bow Tie Analysis
DOI:
https://doi.org/10.28926/briliant.v10i2.1901Keywords:
Budaya Organisasi, Data-Driven Organization, Digital, Tata Kelola, Transformasi Enterprise ArchitectureAbstract
The research aims to identify the risks that occur in the weaving process and provide risk management and prevention strategies. The method of this research is to use fuzzy-bow tie analysis where fuzzy analysis is used to calculate the probability of factors and impacts that occur while bow tie analysis is to identify risk variables and plan management and prevention strategies. The findings from the study have identified five risk variables: fire, work fatigue, Operator accident, machine damage, and product defect. After conducting a survey of 5 employees working in the weaving department by measuring the probability of risk occurrences and the level of risk impact, the results were that of the 5 main risks identified, 3 of them had high risk values and 2 had moderate risk. To reduce the level of risk, risk mitigation is carried out by conducting an analysis of prevention and management strategies using the Bow tie method.
References
Abror, K., Subekti, A., & Rachmat, A. N. (2018). Analisis Risiko Pada Boiler Pabrik Pengolahan Tembakau Dengan Menggunakan Metode FMEA Dan Bow Tie Analysis. Seminar K3, 2(1), 761–766.
Alijoyo, A., Wijaya, Q. B., & Jacob, I. (2020). Bow Tie Analysis. CRMS Indonesia. www.lspmks.-
Anggoro, R. J., Qothrunada, S., & Nisa, Z. (2023). Analisis Identifikasi Bahaya K3 dengan Metode HIRARC pada Unit Recycle Industri Tekstil Nonwoven. INSOLOGI: Jurnal Sains Dan Teknologi , 2(3), 430–439. https://doi.org/10.55123/insologi.v2i3.1874
Anggraini, D., & Dayanti Oktavia, D. (2022). Pengaruh Kualitas Produk, Pelayanan Dan Harga Terhadap Kepuasan Konsumen (Studi Kasus PT.Paberik Tekstil Kasrie). Journal Scientific of Mandalika (JSM), 3(5). http://ojs.cahayamandalika.com/index.php/jomla/issue/archive
Aqlan, F., & Ali, E. M. (2014). Integrating lean principles and fuzzy bow-tie analysis for risk assessment in chemical industry. Journal of Loss Prevention in the Process Industries, 29, 39–48.
Bhayangkara, A. H., Setyawan, A., Fajar, D., & Handayani, S. (2021). Analisis Kecelakaan Kerja Pada Struktur Bawah Bleding Silo Proyek “EPC Talavera” Tuban Menggunakan Metode Bowtie. Rnal Riset Rekayasa Sipil, 7(1), 41–48.
Darmayani, S., Sa’diyah, A., Supiati, M., Muttaqin, F., Rachmawati, C., Widia, M. L., Pattiapon, P., Rahayu, D., Indiyati, E., Bachtiar, E. P., Rahayu, R., & Fajarwati, M. (2023). KESEHATAN KESELAMATAN KERJA (K3) (1st ed.). Widina Bhakti Persada. www.penerbitwidina.com
Fauzi, A., Nisa, B., Napitupulu, D., Abdillah, F., Utama, A. A., Zonyfar, C., Nuraini, R., Purnia, D., Setyawati, I., Evi, T., Dian Handy Permana, S., & Susila Sumartiningsih, M. (2022). METODOLOGI PENELITIAN (1st ed.). CV Pena Persada.
Hasibuan, A., Purba, B., Marzuki, I., & Sianturi, M. (2020). Teknik Keselamatan dan Kesehatan Kerja (J. Simaemata, Ed.; 1st ed.). Yayasan Kita Menulis.
Iskandar, I., & Basuki, M. (2023). Penilaian Risiko K3 pada Operasional Container Crane di Terminal Nilam Surabaya Menggunakan Metode Job Safety Analysis dan Bow Tie Analysis. Prosiding Seminar Nasional Teknologi Industri Berkelanjutan III (SENASTITAN III) Surabaya.
Kaptan, M. (2021). Risk Assessment of Ship Anchorage Handling Operations Using the Fuzzy Bow-tie Method. Ocean Engineering, 236. https://doi.org/10.1016/j.oceaneng.2021.109500
Kumar Tyagi, S., Pandey, D., & Tyagi, R. (2010). Fuzzy set theoretic approach to fault tree analysis. In International Journal of Engineering, Science and Technology (Vol. 2, Issue 5). www.ijest-ng.com
Merna, T., & Al - Thani, F. (2008). Corporate risk management. John Wiley & Sons.
Noverita, R. (2022). Analisis Penyebab Terjadinya Kecelakaan Kerja pada Departemen Weaving 1 Menggunakan Metode HIRA dan SCAT.
Perdana, M., Syairudin, B., & Widyaningrum, R. (2021). Hazard Risk Potential Analysis Using The Fuzzy Bow-Tie Method in LPG Tube Filling Factory. Proceedings of the 11th Annual International Conference on Industrial Engineering and Operations Management, 6502–6511.
Rahmatianti, D., Hidayati, R., & Himawan, A. (2022). Analisis Risiko Ketidakpercapaianya Standar (ET : BT) Berthing Time Pelayanan Kapal dengan Metode Fuzzy dan Bowtie Analysis di PT Pelindo III Cabang Gresik. Jurnal Mahasiswa Manajemen , 3(2), 197–215. https://doi.org/10.30587/mahasiswamanajemen.v3i02.2436
Rindengan, A., & Langi, Y. (2019). Sistem Fuzzy. CV Patra Media Grafindo.
Sahir, S. (2021). Metodologi Penelitian (T. Koryati, Ed.; 1st ed.). Penerbit KBM Indonesia. www.penerbitbukumurah.com
Sawamahasri. (2019). Analisis Risiko Keselamatan dan Kesehatan Kerja Dengan Menggunakan Metode FMECA dan TOPSIS Pada Pembuatan Kain Tenun (Studi Kasus : UKM Tenun Goyor).
Setiawan, A., Yanto, B., & Yasdomi, K. (2018). Logika Fuzzy Dengan MATLAB (Contoh Kasus Penelitian Penyakit Bayi dengan Fuzzy Tsukamoto) (1st ed.). Jayapangus Press. http://jayapanguspress.org
Zyahri, M. (2013). Pengantar Ilmu Tekstil 2. Direktorat Pembinaan Sekolah Menengah Kejuruan.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Briliant: Jurnal Riset dan Konseptual
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
