Analisis Produk Kaos Oblong untuk Meminimalisir Defect dengan Metode New Seven Tools di Konveksi Graha Konveksindo
DOI:
https://doi.org/10.28926/briliant.v9i4.1893Keywords:
Defect, New Seven Tools, QualityAbstract
: Graha Konveksindo is a company that operates in the garment industry, where one of the products produced by this company is T-shirts. The aim of this research is to minimize defects by providing recommendations for improvements to T-shirts. This research was carried out using the New Seven Tools method, where this method can identify and find out the causes of defects in T-shirts and provide recommendations for improvement. The recommendations for improvement given are establishing clear procedures and standard standards for measuring color materials and attaching them to the coloring area, increasing cooperation with raw material suppliers who are reliable and provide high quality materials, checking raw material measurements and checking machine conditions. mixer before the production process, using an inspection checklist to ensure that each inspection step has been carried out correctly.
References
Amalia, R. R., Hairiyah, N., & Nuryati, N. (2022). Implementasi six sigma menggunakan new seven tools pada perbaikan kualitas amplang di UD kelompok melati. Teknologi Industri Pertanian, 17(2), 268–279. https://doi.org/10.21107/agrointek.v17i2.13233
Arianti, M. S., Rahmawati, E., Prihatiningrum, D. R. R. Y., Magister, ), & Bisnis, A. (2020). Analisis Pengendalian Kualitas Produk Dengan Menggunakan Statistical Quality Control (Sqc) Pada Usaha Amplang Karya Bahari Di Samarinda. Jurnal Bisnis dan Pembangunan, 9(2), 2541–1403.
Aryadipo, M., Ali, A., & Hendrizal. (2021). Kualitas Produk dan Kualitas Pelayanan Dalam Membentuk Minat Pembelian Ulang. Jurnal Riset Manajemen Indonesia, 3(1), 71–80.
Daga, R. (2017). Citra, Kualitas Produk, Dan Kepuasan Pelanngan. In Hamzah (Ed.), Global RCI (Pertama, Vol. 5, Nomor 1, hal. 1689–1699). Global Research and Consulting Institute. https://revistas.ufrj.br/index.php/rce/article/download/1659/1508%0Ahttp://hipatiapress.com/hpjournals/index.php/qre/article/view/1348%5Cnhttp://www.tandfonline.com/doi/abs/10.1080/09500799708666915%5Cnhttps://mckinseyonsociety.com/downloads/reports/Educa
Dorothea wahyu Ariani. (2020). Manajemen Kualitas (A. Canty (ed.); Kedua). Universitas Terbuka. http://eprints.mercubuana-yogya.ac.id/id/eprint/12996/1/2020-ARIANI-MANAJEMEN KUALITAS.pdf
Endik Wirawan, & Nur Muflihah. (2022). Integrasi Fmea Dan New Seven Tools Untuk Optimalisasi Penggunaan Bahan Bakar Boiler. Jurnal Penelitian Bidang Inovasi & Pengelolaan Industri, 2(1), 25–37. https://doi.org/10.33752/invantri.v2i1.3244
Febriansyah, F., Ilmi, N., & Lawi, A. (2022). Penerapan Metode Six Sigma dalam Menganalisis dan Menanggulangi Defect Rate pada Pengelasan Tubular. Jurnal Teknik Industri (JURTI), 1(2), 128–137. https://doi.org/10.30659/jurti.1.2.128-137
He, Y., Tangb, X., & Changa, W. (2019). Technical decomposition approach of critical to quality characteristics for Product Design for Six Sigma. Quality and Reliability Engineering International, 26(4), 325–339. https://doi.org/10.1002/qre.1077
Hendra. (2020). Kaos dan Representasi Identitas: Studi Alternatif Penyampaian Pesan Melalui Kaos Orang Poso. Kinesik, 7(3), 223–231. https://jurnal.fisip.untad.ac.id/index.php/kinesik/article/view/125
Huda, M., & Safitri, W. (2021). Analysis of Production Control, Quality Control, and Total Quality Management Against Product Failure. Kontigensi : Jurnal Ilmiah Manajemen, 9(2), 644–652. https://doi.org/10.56457/jimk.v9i2.225
Lafeniya, S. D. A., & Suseno, S. (2023). Pengendalian Kualitas Produk Kain Grey Dengan Metode New Seven Tools Pada PT Djohartex. Jurnal Inovasi dan Kreativitas (JIKa), 2(2), 46–56. https://doi.org/10.30656/jika.v2i2.6003
Miftah, A., Suryantini, A., & Jamhari, J. (2019). Quality Control of Raw Materials for Candied Carica Using P-Chart Analysis and Fishbone Diagram. Jurnal Aplikasi Manajemen, 17(3), 416–425. https://doi.org/10.21776/ub.jam.2019.017.03.05
Nasti, H. (2019). Analisis Pengendalian Kualitas Produk Dengan Metode Statistical Quality Control (Studi Kasus : pada PT “X” Depok). Jurnal Bimbingan dan Konseling (E-Journal), 3(1), 1–11.
Permono, L., Salmia, & Septiari, R. (2022). Penerapan Metode Seven Tools Dan New Seven Tools Untuk Pengendalian Kualitas Produk (Studi Kasus Pabrik Gula Kebon Agung Malang). Jurnal Valtech (Jurnal Mahasiswa Teknik Industri), 05(01), 58–65.
Prabowo, R., & Wijaya, S. (2020). Integrasi New Seven Tools dan TRIZ (Theory of Inventive Problem Solving) untuk Pengendalian Kualitas Produk Kran (Studi Kasus: PT. Ever Age Valves Metals – Wringinanom, Gresik). Jurnal Teknik Industri, 10(1), 22–30. https://doi.org/10.25105/jti.v10i1.8386
Prinia, D., Rizki Ibnu Fatih, M., & Deriefca Rahmawati, N. (2022). Literrature Review Word of Mouth Dalam Membentuk Minat Pembelian Ulang: Kualitas Produk Dan Kualitas Pelayanan. Jurnal Manajemen Pendidikan Dan Ilmu Sosial, 3(1), 225–239. https://doi.org/10.38035/jmpis.v3i1.868
Rahmadhani, A. (2014). Manajemen Operasi (B. Ahmad (ed.); Pertama). CV. Pustaka Setia. http://digilib.uinsgd.ac.id/8788/1/Buku Manajemen Operasi.pdf
Ramlawati. (2020). Total Management Quality (I. Safar (ed.); 1 ed.). Nas Media Pustaka.
Rozi, F., & Nugroho, A. (2022). Upaya Perbaikan Kualitas Produk Batik Di Batik Allusan Menggunakan Metode Six Sigma Dan New Seven Tools. Jurnal Cakrawala Ilmiah, 1(11), 2971–2982.
Sambo, E., Sunday, U. I., Mary, A. M., & John, F. (2022). Impact Of Product Quality On Customer Satisfaction And Loyalty. Nigeria Academy of Management Journal, 17(2), 145–155.
Suci, Y., Nasution, Y., & Rizki, N. (2019). Penggunaan Metode Seven New Quality Tools dan Metode DMAIC Six Sigma Pada Penerapan Pengendalian Kualitas Produk (Studi Kasus : Roti Durian Panglima Produksi PT. Panglima Roqiiqu Group Samarinda). Junral EKSPONENSIAL, 8(1), 126–132.
Wirawati, S. M. (2019). Analisis Pengendalian Kualitas Kemasan Botol Plastik Dengan Metode Statistical Proses Control (SPC) Di PT. Sinar Sosro KPB PAndeglang. Jurnal InTent, 2(1), 94–102.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Briliant: Jurnal Riset dan Konseptual
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
