Desain Woodstove Portable Untuk Menghasilkan Tenaga Listrik
Keywords:
Panas, Tungku, Termoelektrik Generator, ListrikAbstract
Saat ini penggunaan kayu bakar untuk kegiatan memasak serta sebagai pemanas telah menjadi sangat populer, terutama pada saat kegiatan berkemah. Perapian dan tungku dengan bahan bakar padat yang menghasilkan panas dengan biaya rendah dari kayu bakar yang ada disekitar fungsi utama menggunakan panas dari tungku adalah untuk memanaskan air dan panas tungku menghasilkan listrik merupakan manfaat tambahan. Manfaat tambahan juga dapat dihubungkan dengan pembangkit listrik skala mikro, diwujudkan dengan menggunakan termoelektrik generator. Tujuan dari penelitian ini adalah untuk mendapatkan desain tungku berbahan bakar kayu yang terintegrasi dengan termoelektrik generator yang tersedia secara komersil. Sehingga mendapatkan tegangan dari termoelektrik generator yang dapat menghasilkan energi listrik yang maksimal. Tungku dirancang dengan dimensi panjang 30cm lebar 20cm dan tinggi 17cm yang menggunakan 4 buah termoelektrik generator yang dipasang secara parallel pada dinding tungku.
References
Andrapica, G., Mainil, R. I., & Aziz, A. (2017). Pengujian Thermoelectric Generator Sebagai Pembangkit Listrik Dengan Sisi Dingin Menggunakan Air Bertemperatur 10 oc. Jurnal Sains Dan Teknologi, 14(2), 45–50. https://ejournal.unri.ac.id/index.php/JST/article/view/3983/3867
Cadavid, Y., Obando, J., Vandel, A., Cabot, G., & Amell, A. (2021). Effect of air humidity and natural gas composition on swirl burner combustion under unstable conditions. Fuel, 306, 121601. https://doi.org/10.1016/j.fuel.2021.121601
Ge, M., Li, Z., Wang, Y., Zhao, Y., Zhu, Y., Wang, S., & Liu, L. (2021). Experimental study on thermoelectric power generation based on cryogenic liquid cold energy. Energy, 220. https://doi.org/10.1016/j.energy.2020.119746
Ioffe, A. F. (1959). Semiconductor thermoelements and thermoelec. Physics Today, 12(5), 42. https://doi.org/10.1063/1.3060810
Islam, N., & Smith, K. R. (2019). Finding a clean woodstove – A 300-year quest. Energy for Sustainable Development, 52, 147–153. https://doi.org/10.1016/j.esd.2019.07.005
Jangala, S. S. L., Kakumani, V. S. P., Vunnam, N. S., & Sreekanth, P. S. R. (2022). A novel brass metal burner design for conventional LPG stove with convergent holes and swirl flow. Materials Today: Proceedings, 56, 1068–1074. https://doi.org/10.1016/j.matpr.2021.10.056
Kennedy, Anwar, K., Muis, A., Basri, B., & Ilhamsyah, M. (2021). Erratum: Effect of thermoelectric placement on the commercial waterblock to the liquid cooling system performance (J. Phys.: Conf. Ser. (2021) 1763 (012039) DOI: 10.1088/1742-6596/1763/1/012039). Journal of Physics: Conference Series, 1763(1). https://doi.org/10.1088/1742-6596/1763/1/012095
Kesangam, N., Pinitsoontorn, S., & Srimanosaowapak, S. (2018). Effect of initial microstructure on induction heating of A319 aluminium alloy. Materials Today: Proceedings, 5(3), 9615–9623. https://doi.org/10.1016/j.matpr.2017.10.148
Najjar, Y. S. H., & Kseibi, M. M. (2016). Heat transfer and performance analysis of thermoelectric stoves. Applied Thermal Engineering, 102(March), 1045–1058. https://doi.org/10.1016/j.applthermaleng.2016.03.114
Nuwayhid, R. Y., Rowe, D. M., & Min, G. (2003). Low cost stove-top thermoelectric generator for regions with unreliable electricity supply. Renewable Energy, 28(2), 205–222. https://doi.org/10.1016/S0960-1481(02)00024-1
Nuwayhid, R. Y., Shihadeh, A., & Ghaddar, N. (2005). Development and testing of a domestic woodstove thermoelectric generator with natural convection cooling. Energy Conversion and Management, 46(9–10), 1631–1643. https://doi.org/10.1016/j.enconman.2004.07.006
Puspita, S. C., Sunarno, H., & Indarto, B. (2017). Generator Termoelektrik untuk Pengisisan Aki. Jurnal Fisika Dan Aplikasinya, 13(2), 84–87.
Riyadi, T. W. B., Utomo, B. R., Effendy, M., Wijayanta, A. T., & Al-Kayiem, H. H. (2022). Effect of thermal cycling with various heating rates on the performance of thermoelectric modules. International Journal of Thermal Sciences, 178(March), 107601. https://doi.org/10.1016/j.ijthermalsci.2022.107601
Shen, Z. G., Tian, L. L., & Liu, X. (2019). Automotive exhaust thermoelectric generators: Current status, challenges and future prospects. In Energy Conversion and Management (Vol. 195, pp. 1138–1173). Pergamon. https://doi.org/10.1016/j.enconman.2019.05.087
Sohel, R., Arbab, I., Abhijit, D., & Aliakbar, A. (2018). Power generation from low grade waste heat using thermoelectric generator. E3S Web of Conferences, 64, 3–7. https://doi.org/10.1051/e3sconf/20186406005
Sornek, K., Filipowicz, M., Żołądek, M., Kot, R., & Mikrut, M. (2019). Comparative analysis of selected thermoelectric generators operating with wood-fired stove. Energy, 166, 1303–1313. https://doi.org/10.1016/j.energy.2018.10.140
Suryanto, N., Aziz, A., Mainil, R. I., Energi, L. K., Mesin, J. T., Teknik, F., & Riau, U. (2017). PENGUJIAN THERMOELECTRIC GENERATOR ( TEG ) DENGAN SUMBER KALOR ELECTRIC HEATER 60 VOLT MENGGUNAKAN AIR PENDINGIN PADA Jom FTEKNIK Volume 4 No . 2 Oktober 2017 Jom FTEKNIK Volume 4 No . 2 Oktober 2017. 4(2), 3–7.
Valderrama, C., Cortina, J. L., Akbarzadeh, A., Bawahab, M., Faqeha, H., & Date, A. (2022). Solar ponds. Storing Energy: With Special Reference to Renewable Energy Sources, 537–558. https://doi.org/10.1016/B978-0-12-824510-1.00004-0
Wijayanto, H. L. (2021). PERANCANGAN RANGKA KENDARAAN MICRO CAR. 2(2), 6.
Wijayanto, H. L., Wirakusuma, K. W., & Atmoko, N. T. (2022). Pengaruh Variasi Daya Pompa pada System Pendinginan TEG terhadap Tegangan yang Dihasilkan TEG. 22(1), 477–481. https://doi.org/10.33087/jiubj.v22i1.2017
Zoui, M. A., Bentouba, S., Velauthapillai, D., Zioui, N., & Bourouis, M. (2022). Design and characterization of a novel finned tubular thermoelectric generator for waste heat recovery. Energy, 253, 124083. https://doi.org/10.1016/J.ENERGY.2022.124083